Sidst gennemgået 12. november 2026 i forhold til de kilder, der er linket til i dette indlæg.
A site safety supervisor course matters most for the person closest to the hazard, the foreman. The US Bureau of Labor Statistics counted 1,032 fatalities among construction and extraction workers in 2024, and a foreman decides each day what the crew faces.
This is a list of 11 ready-made courses for site supervisors, foremen and construction managers. It starts with the daily crew talk, moves to supervisor duties and hazards, and ends with induction and emergencies. Each group ends with an Vores valg.
A note on qualifications. If your employer, client or regulator asks for an accredited qualification, these courses do not replace it. OSHA says its 30-hour outreach class is more appropriate for supervisors or workers with some safety responsibility, and some states, municipalities or others may require it as a condition of employment, though it is not an OSHA requirement. These templates complement that: they give you free, editable sessions to run on site every week.
Alle 11 kurser på et øjeblik
| Course | Hvad det dækker over | Længde | Amerikansk regel eller vejledning bag emnet |
|---|---|---|---|
| Værktøjskasse-snak: en 10-minutters live-session | Planning and running a short crew talk | 10 min | Ingen citeret her |
| Toolbox talks and safety huddles: a year of ten-minute sessions | Twelve ready talks, attendance and actions | 30 min | Ingen citeret her |
| Sikkerhedskultur, at sige sin mening og arbejdsafbrydelsesmyndighed | Shortcuts, feedback and the right to stop a job | 35 min | Ingen citeret her |
| Opgaver fra supervisor, leder og sikkerhedsrepræsentant | Hvem er ansvarlig for hvad | 45 min | Ingen citeret her |
| Fareidentifikation og risikovurdering | Walking the job, scoring risk, controls | 40 min | Bedste praksis |
| OSHA injury & illness recordkeeping | What to record and report | 40 min | 29 CFR 1904.7, 1904.39 |
| Farekommunikation og GHS | Labels and safety data sheets | 40 min | 29 CFR 1910.1200, 1926.59 |
| Sikkerhedsintroduktion og årlig opfriskning | Site rules for crew, contractors and visitors | 40 min | 29 CFR 1926.21 |
| Nødforanstaltninger og brandforebyggelsesplaner | Alarmer, evakuering og brandforebyggelse | 30 min | 29 CFR 1910.38 |
| Brandsikkerhed, brandvagter og nødevakuering | Extinguishers, routes, head counts | 40 min | Ingen citeret her |
| Sikkerhedslovgivning, udvalg, ledelsessystemer og revisioner | Pligter, udvalg og revisioner | 40 min | Ingen citeret her |
Running the crew each day
Three courses for the start of every shift.
Værktøjskassesnak: en 10-minutters live-session for alle besætninger
This 10-minute course has two lessons and a five-question final check. The first covers how the 10 minutes run, and the second covers how to keep the talk optional and inclusive, and how to adapt it for a crew spread across a site. It comes with an eight-slide live deck, so a foreman can run it at the start of a shift. Ask the crew to answer one question each before they pick up tools.
Toolbox talks and safety huddles: a year of ten-minute sessions
This 30-minute course has six lessons: how to run a ten-minute talk, twelve ready talks for a year, using a safety moment to start any meeting, capturing attendance and actions, rotating presenters, and measuring whether talks change behaviour. It is written for site and shift supervisors, and it gives a foreman a script for every month of the season. Rotate who presents, as the course suggests.
Sikkerhedskultur, at sige sin mening og arbejdsafbrydelsesmyndighed
Crews copy the foreman. This 35-minute course has six lessons on how leaders shape safety culture, why people take shortcuts, giving feedback on unsafe behaviour, stop-work authority and the right to withdraw, speaking up, and writing a personal safety commitment. Its "stop or carry on?" scenario is a good way to practise the moment a crew member says "wait". Run it before a busy phase.
Our pick: Toolbox talk, a 10-minute live session. It is the shortest course here, so a foreman can use it tomorrow morning without moving the schedule.
Supervisor duties and hazards
Four courses for the walk round the site and the paperwork behind it.
Opgaver fra supervisor, leder og sikkerhedsrepræsentant
OSHA's construction rule says an employer must instruere hver medarbejder i at genkende og undgå usikre forhold, and on site that instruction often comes from the foreman. This 45-minute course has six lessons: who is responsible for what, supervising safe work, consulting workers and the safety representative, incident and near-miss follow-up, contractors and visitors under your control, and personal duty and records. It uses a worker who will not wear the right equipment as a scenario. It is general, so add your own law.
Fareidentifikation og risikovurdering for teams
Foremen walk the site and spot hazards first. This 40-minute course has six lessons: hazard, risk, likelihood and severity, breaking a task into steps, scoring risk with a matrix, the hierarchy of controls from eliminate to PPE, writing and reviewing the assessment, and involving workers. Ask the crew to rank the controls for a real task on your site, and see how many pick the best one.
OSHA injury & illness recordkeeping
Records are a supervisor's job too. OSHA's rule says a case is recordable if it results in death, days away from work, restricted work or transfer to another job, medical treatment beyond first aid, or loss of consciousness, and a fatality must be reported to OSHA within eight (8) hours. This 40-minute course has six lessons and a 12-question final check with an 80 percent pass mark. It covers whether a case is work-related, first aid versus medical treatment, the timelines, and the 300, 300A and 301 forms. Check whether the US rules apply to your site.
Farekommunikation og GHS
Chemicals arrive on every site, from fuel to sealants. OSHA's rule says employers must give employees effektiv information og træning om farlige kemikalier i deres arbejdsområde på tidspunktet for deres første opgave, and for construction work, 29 CFR 1926.59 carries the same requirements. This 40-minute course has eight lessons, from reading a GHS label with its six elements and pictograms to finding key facts in a 16-section safety data sheet, plus a 12-question final check. Hand out a real label from your store and ask what it means.
Vores valg: Opgaver som supervisor, leder og sikkerhedsrepræsentant. It is the course most directly about the foreman's own role, and it answers "what is on me?" before an incident does.
Induktion og nødsituationer
Fire retter for den første dag på stedet og den værste dag på stedet.
Sikkerhedsintroduktion og årlig opfriskning for medarbejdere, entreprenører og besøgende
Foremen induct new crew, subcontractors and visitors, and a script keeps that consistent. This 40-minute course has six lessons: rights and duties at work, site rules on access, speed limits, permits and restricted areas, the hazards you will meet, emergency arrangements, reporting hazards and near misses, and rules for contractors and visitors. It opens with a first morning at a depot, so swap in your own gate. Use it again each year as the refresher.
Nødforanstaltninger og brandforebyggelsesplaner
OSHA's regel siger, at en arbejdsgiver skal gennemgå beredskabsplanen med hver medarbejder, der er omfattet af planen when the plan is developed or the employee is first assigned to a job. This 30-minute course has seven lessons on raising the alarm, getting out, shelter in place, preventing fires, and the role of evacuation wardens, with a 10-question final check. The rule applies only where an OSHA standard requires a plan, so check with your safety lead.
Brandsikkerhed, brandvagter og nødevakuering
A foreman may be named the fire warden. This 40-minute course has six lessons on the fire triangle and causes, prevention rules for housekeeping and hot work, choosing and using an extinguisher, evacuation routes and assembly points, the warden's sweeps and head counts, and drills and records. Run its "match it" extinguisher activity next to your real extinguishers.
Sikkerhedslovgivning, udvalg, ledelsessystemer og revisioner
This 40-minute course explains why the law requires a safety system, employer, manager and worker duties, how a joint safety committee runs, a management system in five steps, inspections and audits, and what to do when the regulator calls. It frames everything else a supervisor does. It is global, so add the law and the regulator for your site.
Vores valg: Sikkerhedsintroduktion og årlig opfriskning. Every new starter, subcontractor and visitor passes through the foreman's hands, and this gives them one repeatable welcome.
Sådan ruller du planen ud
Start with the courses tied to a duty: recordkeeping and the emergency action plan where OSHA's rules cover your site, and the hazard communication course where chemicals are in use. Put the induction and the daily toolbox talk into week one. Then schedule annual refreshers and add role-specific depth, such as the stop-work course before a busy phase. Add any state or country rule for your location, and any accredited qualification your employer or client asks for. Our emner om sikkerhed på arbejdspladsen already cover talk ideas, so use them rather than starting from a blank page.
Forankre hver session til den samme kendsgerning: 1,032 construction and extraction workers died on the job in the US in 2024, and the foreman is the person closest to every one of those hazards.
Måder at afholde disse kurser på AhaSlides
You can offer all 11 as self-paced courses and live decks, and add surveys to most. Here is how:
- Kurser i eget tempo. Brug AhaSlides course creator to send each new supervisor a course before their first shift in charge.
- En live Q&A-disk. Collect questions ahead of the session, then answer them in the site cabin or online. For running it well, see our 9 tips til en vellykket spørgerunde.
- Undersøgelser. Most templates come with a post-course survey and a 30-day check-in, and you can see how to spore færdiggørelsen af medarbejderuddannelse.
Fire diastyper udfører det meste af arbejdet:
- Vælg svar. Ask: "Which of these is a recordable injury?" Show the split before you reveal the answer.
- Ordsky. Ask: "What is the one hazard on this site that worries you most?" The biggest words show where to walk first.
- Vurderingsskala. Ask, before and after: "How confident are you about stopping a job you think is unsafe?" Rate from 1 to 5 and compare the averages.
- Åben. Ask: "What would you change about how we start the day?" Answers can be anonymous, so people say what they think.
Ofte stillede spørgsmål
What training does a site supervisor need?
Hazard identification, supervisor duties, toolbox talks, recordkeeping and emergency planning. In the US, OSHA's 30-hour outreach class is more appropriate for supervisors or workers with some safety responsibility, and the courses above are a free way to run the weekly sessions around it.
Is supervisor safety training required by law?
It depends on your country, state and employer. In the US, OSHA's construction rule says the employer must instruere hver medarbejder i at genkende og undgå usikre forhold, though outreach cards are not an OSHA requirement, even where an employer or client asks for one. Check your regulator.
Hvad er en værktøjskassesnak?
A short, informal safety briefing given to a crew before or during a shift. The 10-minute toolbox talk course er bygget op omkring det.
How do foremen record injuries?
By following the regulator's recordkeeping rules. In the US, a case is recordable if it results in death, days away from work, restricted work or transfer to another job, medical treatment beyond first aid, or loss of consciousness, and fatalities must be reported within eight (8) hours.
Dette indlæg er generel information, ikke juridisk rådgivning. For at træffe en beslutning om din egen arbejdsplads, skal du tale med en kvalificeret advokat eller tilsynsmyndigheden.
