Laatst herzien op 12 november 2026 aan de hand van de bronnen waarnaar in dit bericht wordt verwezen.
Construction site safety training has to cover what hurts people on site. The US Bureau of Labor Statistics counted 1,032 deaths among construction and extraction workers in 2024, and 370 of them were falls, slips and trips.
This is a list of 11 ready-made courses for site managers, safety coordinators and subcontractor leads. They are free, toolbox-style courses that sit beside any card or certificate you already ask for, such as OSHA 10 or 30, and do not replace one. The list runs from falls and ladders to health hazards, then induction and emergencies. Each group ends with an Onze keuze.
Alle 11 gangen in één oogopslag
| Cursus | Wat het omvat | Lengte | Amerikaanse regelgeving of richtlijnen met betrekking tot dit onderwerp. |
|---|---|---|---|
| Werken op hoogte, ladders, steigers en uitglijden, struikelen en vallen | Avoiding falls, ladders, scaffold tags, harnesses and rescue | 40 min | 29 CFR 1926.503 en 1926.454 |
| Veiligheid van ladders | Choosing, inspecting, setting up and climbing a ladder | 25 min | 29 CFR 1926.1060 |
| Toolbox talks and safety huddles | Running a ten-minute talk, with twelve talks for a year | 30 min | Geen enkele hier vermeld |
| Respirable crystalline silica awareness (construction) | Silica hazards, controls, respirators and medical surveillance | 30 min | 29 CFR 1926.1153(i) |
| Preventie van hitteziekten | Heat illness signs, water, rest, shade and acclimatisation | 30 min | OSH Act General Duty Clause |
| Persoonlijke beschermingsmiddelen (PBM) | Picking, wearing and caring for PPE | 35 min | 29 CFR 1926.95 |
| Gevarencommunicatie & GHS | Het lezen van etiketten en veiligheidsinformatiebladen | 40 min | 29 CFR 1910.1200 |
| Veiligheidsintroductie en jaarlijkse herhalingscursus | Site rules, hazards and reporting for new starters, contractors and visitors | 40 min | Geen enkele hier vermeld |
| Noodactie- en brandpreventieplannen | Raising the alarm, getting out and preventing fires | 30 min | 29 CFR 1926.35 |
| Brandveiligheid, brandwachten en noodevacuatie | Brandblussers, evacuatie routes en taken van de toezichthouder | 40 min | Geen enkele hier vermeld |
| Veiligheidswetgeving, commissies, managementsystemen en audits | Taken, veiligheidscommissies, inspecties en audits | 40 min | Geen enkele hier vermeld |
Falls, ladders and heights
Three courses for the work that happens above the ground.
Werken op hoogte, ladders, steigers en uitglijden, struikelen en vallen
OSHA's construction rule says the employer must provide a training program for each employee who might be exposed to fall hazards, and a separate rule requires training for anyone who works on a scaffold. This 40-minute course has six lessons, from why falls kill to planning the job (avoid, prevent, then arrest the fall), ladders, scaffolds, harnesses and anchors, and slips and trips on the same level. Learners rank the options for a job and read a scaffold inspection tag. It suits scaffolders and labourers who work at height every day. Check which rule covers your site.
Veiligheid van ladders
For construction, OSHA's ladder rule says the employer must provide a training program for each employee using ladders and stairways. This 25-minute course has seven lessons and a 10-question final check with an 80 percent pass mark. It covers choosing the right ladder, inspecting it before every use, setting it up and climbing it, then fixed ladders and what to do when things go wrong. Note that the course itself is built on OSHA's general industry ladder rules, so add your own site rules.
Toolbox talks and safety huddles
Crews change from one week to the next, and a hazard that was fresh in March is forgotten by June. This 30-minute course teaches a four-step way to run a ten-minute talk (pick, brief, ask, record), then gives twelve ready talks for a year. It also covers capturing attendance and actions, rotating presenters and checking whether talks change behaviour. It has an activity on fixing a flat talk, which suits any supervisor whose crew has stopped listening.
Onze keuze: Werken op hoogte, ladders, steigers en uitglijden, struikelen en vallen. It puts the whole fall sequence in one course, from avoiding the job to rescue, and it tackles the hazard behind the 370 deaths above.
Health hazards on site
Four courses for harm that does not show up as a single accident.
Respirable crystalline silica awareness (construction)
Cutting, grinding, drilling and demolishing concrete, masonry, stone or tile makes silica dust. OSHA's rule says employees must be able to demonstrate knowledge of the health hazards, the tasks that could expose them and the measures the employer has put in place, including respirators. This 30-minute course has seven lessons covering the hierarchy of controls, Table 1, respirators, medical surveillance and your site's competent person. It ends with a 10-question final check. It fits concrete crews, masons, tile setters and demolition teams.
Preventie van hitteziekten
Summer work in the sun and in hot buildings is risky, and new and returning workers are at higher risk. This 30-minute course has six lessons: who is at higher risk, the signs of heat rash, cramps, exhaustion and heat stroke, controls such as water, rest, shade and acclimatisation, and what to do in a heat emergency. The course is based on the OSH Act General Duty Clause, which says employers must furnish a place of employment free from recognised hazards that are causing or are likely to cause death or serious physical harm, plus OSHA and NIOSH heat guidance. It ends with a 10-question final check.
Persoonlijke beschermingsmiddelen (PBM)
Hard hats, eye, hand and foot protection only work when they are the right kit and worn the right way. OSHA's construction rule says protective equipment must be provided, used and maintained in a sanitary and reliable condition wherever it is necessary. This 35-minute course has seven lessons on why PPE is the last line of defence, how to pick it for each hazard, how to put it on and take it off, and how to care for it and replace it. It ends with a 10-question final check and a demonstration. The course itself is built on OSHA's general industry PPE rule, so add your site rules.
Gevarencommunicatie & GHS
Paints, solvents, adhesives and fuels are on most sites. OSHA's rule says employers must give employees Effectieve informatie en training over gevaarlijke chemicaliën in hun werkgebied op het moment van hun eerste aanstelling., so check how it applies to your site. This 40-minute course has eight lessons: your right to know, reading a GHS label with its six elements and pictograms, finding key facts in a 16-section safety data sheet, and the 2024 update. Hand out a real label from the site store and ask what each pictogram means.
Our pick: Respirable crystalline silica awareness (construction). The course names the health effects (cancer, lung, immune system and kidney effects) and ties them to the tasks on your site, so it speaks directly to what a worker does at the saw.
Induction and emergencies
Four courses for the first day on site and the worst day on site.
Veiligheidsintroductie en jaarlijkse herhalingscursus
New subcontractors and visitors have to learn the site before they walk it. This 40-minute course has six lessons: rights and duties, site rules on access, permits and restricted areas, the hazards you will meet, emergency arrangements, reporting hazards and near misses, and rules for contractors and visitors. It opens with a first morning at a depot, so swap in your own gate. Use it as the yearly refresher as well.
Noodactie- en brandpreventieplannen
Sites change every week, and exits and assembly points change with them. OSHA's construction rule says an emergency action plan must cover escape procedures and escape routes, how to account for everyone after an evacuation, and the preferred way to report a fire or other emergency, where a standard requires a plan. This 30-minute course has seven lessons on raising the alarm, getting out, staying or sheltering, and preventing fires. It is built on OSHA's general industry rules, so add your site plan.
Brandveiligheid, brandwachten en noodevacuatie
This 40-minute course covers the fire triangle and common causes, prevention rules for housekeeping, hot work and storage, choosing and using an extinguisher, evacuation routes and the warden role. It trains site fire wardens to run sweeps and head counts. Its scenario about a colleague still in the toilet when the alarm sounds is a good one to talk through when the site is busy.
Veiligheidswetgeving, commissies, managementsystemen en audits
This 40-minute course explains why the law requires a safety system, who owes what (employer, manager and worker), how a joint safety committee runs, a management system in five steps, and inspections and audits. It ends with how to work with the regulator when they call. Give it to committee members and safety representatives, and add your own law, because the course is global.
Onze aanbeveling: Veiligheidsintroductie en jaarlijkse herhalingscursus. Every new starter, contractor and visitor passes through it, so it reaches every new person on site.
Hoe voer je het plan uit?
Start with the courses tied to a duty and with induction: fall and scaffold training, ladders, silica where your crews cut or grind, PPE, hazard communication and the emergency plan. Put the induction before anyone's first shift. Then schedule annual refreshers, run a toolbox talk each week, and add depth by role, such as the heat course before summer. Add any state or country rule for your location. For more talk ideas, see our veiligheidstips voor ladders, slips, trips and falls safety talk en onderwerpen over veiligheid op de werkplek.
Anchor every session to the same fact: 370 construction and extraction workers died in falls, slips and trips in 2024.
Manieren om deze cursussen te geven op AhaSlides
AhaSlides Het is een alles-in-één platform voor samenwerking tussen teams en klaslokalen, en je kunt alle 11 cursussen in drie formaten aanbieden:
- Cursussen in eigen tempo. Gebruik de AhaSlides course creator to send each new starter a course before their first shift.
- A live session deck. Each course comes with a deck to run after it. Collect questions before the session, then answer them at the morning briefing or online. For running it well, see our 9 tips voor een succesvolle vraag- en antwoordsessie.
- Enquêtes. Gebruik de enquête na afloop van de cursus en de evaluatie na 30 dagen die bij elk sjabloon worden geleverd, en ontdek hoe u Het bijhouden van de voltooiing van trainingen door medewerkers.
Vier soorten dia's doen het meeste werk:
- Kies een antwoord. Ask: "Which of these is the most common way to fall on this site?" Show the split before you reveal the answer.
- Woordwolk. Ask: "What makes it hard to wear your PPE all shift?" The biggest words show where the crew needs practice.
- Beoordelingsschaal. Ask, before and after: "How confident are you in checking a scaffold tag?" Rate from 1 to 5 and compare the averages.
- Open einde. Ask: "What is the biggest hazard on this site right now?" Answers can be anonymous, so people say what they think.
FAQ
What safety training is required for construction workers?
Hazard awareness for the work they do, with fall protection, ladders and scaffolds, PPE, hazard communication and, where it applies, silica. OSHA's rule says the employer must instruct each employee in the recognition and avoidance of unsafe conditions, and some US employers or clients also ask for an OSHA 10 or 30 card.
Is scaffolding training required?
Yes, where OSHA's scaffold rule applies. It says each employee who works on a scaffold must be trained by a person qualified in the subject matter to recognise the hazards of the type of scaffold in use. The cursus werken op hoogte covers scaffolds, and does not replace training by a qualified person.
What is OSHA 10 for construction?
It is a 10-hour class delivered by an OSHA-authorised trainer, meant to give workers awareness of common job-related safety and health hazards, and it ends with a completion card. These courses do not issue a card. They give your crew free, repeatable training between cards.
How often should site staff retrain on safety?
Induct new starters before work, run a toolbox talk each week and refresh formal training on a set cycle, and a yearly refresher is a sensible default. OSHA's ladder rule says retraining must be provided as necessary so the employee keeps the understanding and knowledge they gained.
Dit bericht bevat algemene informatie en is geen juridisch advies. Voor een beslissing over uw eigen werkplek dient u contact op te nemen met een gekwalificeerde advocaat of de toezichthouder.
