Staff catch calibration drift early when they are trained to read the sequence of control results, not just check each point against its limits. This guide is for diagnostic services directors and laboratory educators. It covers five steps: describing the performance problem, diagnosing the gaps, designing practice, working through an example, and assessing transfer. It is about training design, not about acceptance limits or corrective action. Your laboratory's approved procedure decides those, and a laboratory educator should validate every case before use.
What the research says, and does not say
Two classic papers frame this work. Levey and Jennings introduced control charts to the clinical laboratory in 1950, which is why many people still call a quality-control plot a Levey-Jennings chart. In 1981, Westgard and colleagues proposed a multi-rule Shewhart chart for quality control in clinical chemistry, the basis of what are now called the Westgard rules.
They describe how to read a chart. They do not show that a given training method works, and they do not replace your own procedures. Use them to shape your cases, then test the training with your own staff.
Quick facts
| Question | Short answer |
|---|---|
| What is the task? | Interpret calibration trends and choose an approved response. |
| What is drift? | A gradual movement in results that may stay inside limits for a while. |
| What makes practice useful? | Unseen charts, a reasoned answer and feedback tied to the decision. |
| What makes scores trustworthy? | Assessors scoring independently, then comparing evidence. |
| What should you avoid scoring? | Speed or confidence alone. |
| What can it not decide? | Limits or corrective action. Your approved procedure does. |
1. Describe the performance problem
Start with the problem: results that each pass their limits while the sequence trends upward or downward. State what the role must do: interpret calibration trends and choose an approved response. A tech who checks each point against a limit is doing something different from one who reads the sequence. Say which of the two your laboratory needs, and when.
2. Diagnose the learning and context gaps
Compare the required task with the current activities and assessments. If staff learn the rules from a one-page summary and are tested on definitions, they practise recall, not the judgement of reading an unfamiliar chart. Our guide to matching learning activities to Bloom's taxonomy helps you tell the two apart. Before prescribing training, check the other causes: reagent lots, maintenance schedules, software settings, and whether anyone has time to review charts.
3. Design purposeful preparation and practice
Plan three layers:
- Preparation. A short self-paced check of prerequisites: the terms, your chart conventions and your approved response steps. A recall check confirms prerequisites only.
- Unseen chart drills. Show a chart, ask whether it needs a response and why, then give feedback linked to the decision.
- Live input where it adds value. A senior scientist talks through an ambiguous trend. Asynchronous review is enough for clear ones.
A worked case with feedback and a retry
Illustrative. A laboratory educator should validate the chart, case and answer criteria before use.
The case. A control chart shows seven results in a row, all inside the limits, each slightly above the one before. The instrument was serviced last month.
The task. Decide what to do. Explain your decision, cite the evidence and say what further information you need.
A first attempt. "All points are in range, so no action." A reviewer asks about the direction of the sequence, what else changed recently and what the approved procedure says about trends. The learner has no answer to any of them.
Feedback and retry. The reviewer notes that each point was checked alone and the pattern was ignored. The learner is asked to look at the sequence.
A stronger attempt. The learner names the upward trend, notes the recent service and says this may be drift that has not yet breached a limit. They would follow the approved procedure for trends, check the calibration record and reagent lot, and tell a supervisor. They say what they still need: the procedure's trend rule and the previous month's chart.
Why each response is defensible or incomplete. Judge against approved criteria, not the reviewer's preference. The first attempt treats in-range as safe and takes no action, which is a critical error. The second reads the sequence and stays within the role.
Building the chart set
Practice is only as good as the charts you use. Keep the set small at first:
- Use charts from your own laboratory. Real trends teach more than tidy textbook ones.
- Include charts that do not need action. Staff who only see drift learn to see it everywhere.
- Have a laboratory educator write the answer. Record what the sequence shows, the likely causes to check and the approved response.
- Remove anything that identifies a patient or a person. Follow your laboratory's data rules before charts go into training.
- Retire charts that staff have memorised. A chart seen twice tests memory, not judgement.
Note which charts staff get wrong most often. Those are the ones to discuss live, and they can show where a procedure is unclear as well as where training is thin.
4. Assess capability and plan transfer
Use trend-interpretation accuracy and the quality of the response choice on a new chart. Score each criterion from 0 to 2:
| Criterion | 0: absent or unsupported | 1: partial, with omissions | 2: complete and justified |
|---|---|---|---|
| Task execution | Checks single points only. | Notices a trend without acting. | Reads the sequence, chooses an approved response and records it. |
| Reasoning | Gives no reason. | Gives a reason without naming uncertainty. | Explains alternative causes, constraints and uncertainty. |
| Boundaries | Acts outside the procedure. | Escalates without saying why. | Uses the approved procedure and seeks help when information is insufficient. |
Calibrate the scoring: have two assessors score the same answer independently, compare their evidence and revise any criterion where they disagree. This rubric is a proposed starting point, not a validated readiness standard. Define critical errors separately, for example taking no action on a trend the procedure says to act on. An overall score must never hide a critical failure. For criteria on reasoning, see our guide to assessing judgement and problem-solving in training.
Add a workplace follow-up: a supervised review of real chart sign-offs after a few weeks. Compare baseline and unseen follow-up charts, define the population, denominator and timing before you start, and look for concurrent changes, such as a new instrument or reagent supplier, before you credit the training.
Where interactive delivery helps
In a live session, show an unseen chart and ask each person to submit a decision privately, then display the spread before discussing the reasoning. Self-paced delivery suits the prerequisite check and the review of reasoning afterwards. AhaSlides, an all-in-one engagement platform for teams and classrooms, supports interactive learning and both live and self-paced delivery. Check how you would run the drills in your own workflow before you rely on it.
What training will not fix
- Unclear procedures. Staff cannot follow a trend rule that does not exist.
- No time to review charts. Training cannot create it.
- Cases nobody reviewed. A wrong example teaches the wrong lesson.
- Evidence limits. The two sources above describe charting methods, not training outcomes for your team.
Frequently asked questions
What is calibration drift?
A gradual movement of results away from their target, often while individual results are still inside their limits.
What is a Levey-Jennings chart?
A control chart that plots quality-control results over time against limits set from the mean and standard deviation.
What are the Westgard rules?
A set of multi-rule criteria for judging control results, proposed in 1981. Use your laboratory's own adopted rules.
How do you check that assessors agree?
Have them score the same answer independently, compare their evidence and revise any criterion where they differ.
Who should review the cases?
A laboratory educator or senior scientist, before anyone is trained or scored on them.
Where to start
Pick one analyte and gather five reviewed charts, including two that drift. Run one unseen-chart drill, compare two assessors' scores and revise the criteria where they differ.
To see how a drill could run live or self-paced, explore AhaSlides.








